• Check Valves
  • Inline Check Valve (2 Port)
  • Inline Check Valve (4 Port)
  • Pilot to Close Checks
  • Shuttle Valves
  • 4 Port Shuttle
  • Triple Shuttle
• Directional Controls
  • Pilot Operated 2 Pos, 4 Way (Detented)
  • Pilot Operated 2 Pos, 4 Way (Spring)
  • Pilot Operated 3 Pos, 4 Way (Spring)
• Flow Controls (2 Port)
  • Needle Valve (Fine Control)
  • Needle Valve
• Flow Controls (3 Port)
  • Bypass Flow Control
  • Bypass Flow Control with Relief
  • Bypass with Relief and Solenoid
• Load Control (Checks)
  • Inline Pilot Check
  • Inline Pilot Check (4 Port)
  • Pad Mounted Pilot Check
  • Pad Mounted Module Pilot Check
  • Double Inline Pilot Check
• Load Control (Counterbalance)
  • Inline Counterbalance
  • Inline Counterbalance (4 Port)
  • Pad Mounted Counterbalance
  • Pad Mounted Module Counterbalance
  • Double Inline Counterbalance
• Modules and Subplates (CETOP3)
  • CETOP3 Subplate
  • CETOP3 Subplate with Relief
  • Subplate with Relief and Unloader
  • CETOP3 Series Subplate
  • CETOP3 Series Subplate with Relief
• Modules and Subplates (CETOP5)
  • CETOP5 Single Subplate
  • Single Flow Control and Relief
  • CETOP5 Subplate with Relief
  • Subplate with Relief and Unload
• Pressure Controls
  • Line Mounted Reliefs
  • Soft Start Relief
  • Pump Mounted Relief Valves
  • Proportional Relief Valves
  • X-Line Relief (4 Port)
  • Motor Mounted X-Line
  • X-Line Reliefs (5 Port)
  • Transmission Flushing Valve
  • Transmission Flushing with X-Line
• Solenoid Valves
  • Solenoid Spool (2 Port)
  • Solenoid Poppet
  • Solenoid Check Valves
  • Solenoid Selector (3 Port)
  • Solenoid Spool 2Pos 4Way
  • Solenoid Spool 3Pos 4Way
• Special Function
  • Cylinder Regeneration Valves
  • Pressure Sensitive Regeneration
  • Piston Motor Overrun Valves
  • Quick Hitch Valves
  • Tilt Control Solenoid
  • Tilt with 5 Port X-Line Relief
  • Pilot Valves

Counterbalance cartridges are modulating, hold and lowering valves. These Pad mounted modules are designed to sandwich between a SAE port and the SAE Flange. Available in both Code 61 & 62 and sizes from 1/2" to 1&1/2".  Flow capacity from low to 400LPM.